Description

The EM69ATC 3 and 4 axis CNC Machining Center is versatile and great for machining engine blocks and making custom parts with a 24-tool Automatic Tool Changer. Read more in the “Features” tab below.

Rottler’s totally new, next generation CNC control found in the EM Series machines continues to give users unmatched speed of learning and ease of use when probing/digitizing without the need of additional cumbersome and expensive software. This advanced 4C software lets users know they are machining with the most state-of-the-science equipment available. Read more in the “Control” tab below.

Features

Instant Internet Support – Rottler offers cutting edge internet support direct from your machine to the factory. Skype is installed for internet support. This feature gives you instant, direct contact with Rottler right on the machine without even making a phone call.

Automatic Tool Changer – 24 Space Automatic Tool Changer for CAT40 Taper tools. The tool changer can handle up to a 10″ (250mm) diameter tool weighing 15.5lbs (7kgs).

Windows Operating System – Rottler uses Windows and Touch Screen Technology/ through a 32″ (813mm) panel. The Windows software has many advantages such as a common user interface that the whole world is familiar with.

Touch Screen Control – Two different operating systems are available. (1) The Rottler system for simple, fast and easy programming of common jobs such as boring, surfacing and line boring. Anyone can learn in a few hours. (2) The other is the Optional 4C CAD/CAM software for advanced CNC programming for endless opportunities such as making parts, engraving names and much more.

Brushless Servo Motors with BISS Encoders – The EM69ATC has the latest technology servo motors with BISS encoders offering 100 times finer resolution compared to previous models. These new Servo motors give maximum torque and performance throughout the RPM range for improved accuracy and increased productivity. BISS encoders eliminate any limit switches and do not require homing at star up saving time and increasing reliability.

Electronic Hand Wheel – Offers operator infinite control of machine movement in all axes for quick and easy setup. Also controls variable feed rate during automatic cycles.

Spindle – Super hard finish resists wear for years of operation. 0-10,000 RPM Spindle Rotation with quick change CAT40 Taper.

Massive Frame – Massive Frame boasts full enclosure with Sight Panels in front and on sides of enclosure to view work area.

Direct Drive Ball Screws – Direct drive precision ball screws for faster rapid feed rates and accurate positioning eliminating backlash problems relating to belt drive systems.

Linear Roller Slideways – All Axes of the EM machines are supported on low friction Linear Roller Bearing Slideways allowing fast acceleration and precise positioning for more production and precision parts.

Large T-Slot Table – Allows operator to clamp or fixture any job quickly and easily.

Coolant Tank – Complete coolant system for tool lubrication during machining. 30 gallon capacity.

Automatic Lubrication – For years of trouble free life and reduced wear.

Chip Auger – Automatically removes chips from enclosure and deposits chips in wheeled disposal cart.

Accessories
    • (313mm) Computerized Touch Screen.
    • Software options available for Programmable & Automated Cycles such as Boring, Surfacing, Lower Sleeve Offset Boring, Water Hole Repairs, Main & Cam Line Boring, General CNC Machine Work and more.
    • Internet connection to the machine computer must be provided for training support and service.
    • Programming and Machine Operation Thru 32” (813mm) Extra BrightTouch Screen
    • Electronic hand wheel for manual movement – per click: Coarse Mode .01” (.25mm) Medium Mode .001” (.01mm) Fine Mode .0001” (.002mm)
    • Precision Digital Readout, .0001” (.002mm) Resolution in 3 Axis
    • Machine Prepared for 4th axis fixture upgrade
    • 3 Axis Movement by direct drive Precision Ball Screws & AC Servo Motors – Infinitely Variable Horizontal Movement – Left and Right Direction – 40.5” (1028mm)
    • Extra Clearance Between Spindle Nose and Machine Table – 40″ (1016mm)
    • High Speed, Rigid Spindle for Chatter Free Cutting
    • Spindle Rotation by AC Servo Motor – Infinitely Variable 0-8,000RPM
    • Automatic Central Lubrication System
    • 24 Space Tool Changer for CAT 40 Taper
    • Full Enclosure with Sight Panels of Work Area
    • Complete Coolant System for Tool Lubrication During Machining
    • Operation and Spare Parts Manual
    • Chip auger for chip removal
Enquiry Now

PREMIER NEWSLETTER

Keep up to date with our latest news by subscribing to our regular newsletter

    2022 Premier Machinery